Enter BGW’s Immersive Sound Amplifiers. These BGW’s pack up to 6 channels in a single chassis, and do it with power and control never before available in any commercial amplifier. These BGW’s are fully-balanced differential amplifiers (an industry first) and offer unprecedented speed, control and low noise.
$18,773.00
Class AB with fully balanced differential design; 4-quadrant input stage, current feedback and dual DC Servos.
Input Connectors
DB-25 and Balanced XLR
Attenuation
0 to 12 dB in 1.5 dB steps
Input Impedance
47 kΩ
Input Sensitivity
1.825 Vrms for rated 8 ohm output
Gain
27.8 dB
Polarity
XLR Pinout (Pin 1 = Ground, Pin 2 = Positive, Pin 3 = Negative), DB-25 Pinout (Dolby standard)
Typical THD
<0.05%
Maximum THD
1.0%
IMD
<0.05%
Slew Rate
60 V/µs
Damping Factor
>400:1 (ref. 8Ω)
Crosstalk
>85 dB @ 20 Hz – 20 kHz
DC Offset
<10 mV (5 mV typical)
Recommended load
4/8 Ω
Frequency Response
8 Hz – 56 kHz, +0/-3 dB; 20 Hz – 20 kHz, +0,-0.3 dB
Signal-to-Noise Ratio
>124 dB referenced to rated output (A-Weighted)
Speaker Outputs
1 Pair per channel High-current, 32 A Detachable “Phoenix” style connectors
Power Requirements
2 x 15 A @ 120 V; 2 x 8 A @ 230V AC 50-60 Hz
Power Consumption
<1/2 W @ Standby, 2 x 1440W Maximum
Dimensions
20.75″ x 19″ x 5RU(LxW in inches)
Weight
Up to 68kg
