Search
Close this search box.

BGW VXi 4.2

6 Channel Immersive Sound Amplifier

4 Channels – 400 W/channel @ 8Ω, 600 W/channel @ 4Ω, 600 W/channel @ 2Ω

2 Channels – 800 W/channel @ 8Ω, 1200 W/channel @ 4Ω, 1600 W/channel @ 2Ω

Enter BGW’s Immersive Sound Amplifiers. These BGW’s pack up to 6 channels in a single chassis, and do it with power and control never before available in any commercial amplifier. These BGW’s are fully-balanced differential amplifiers (an industry first) and offer unprecedented speed, control and low noise.

$18,500.00

Including GST

US$11000.00

Manufacturer List Price
Add 10% GST

Specifications


Topology

Class AB with fully balanced differential design; 4-quadrant input stage, current feedback and dual DC Servos.

Input

Input Connectors
DB-25 and Balanced XLR

Attenuation
0 to 12 dB in 1.5 dB steps

Input Impedance
47 kΩ

Input Sensitivity
1.825 Vrms for rated 8 ohm output

Gain
27.8 dB

Polarity
XLR Pinout (Pin 1 = Ground, Pin 2 = Positive, Pin 3 = Negative), DB-25 Pinout (Dolby standard)

Amplifier Specifications

Typical THD
<0.05%

Maximum THD
1.0%

IMD
<0.05%

Slew Rate
60 V/µs

Damping Factor
>400:1 (ref. 8Ω)

Crosstalk
>85 dB @ 20 Hz – 20 kHz

DC Offset
<10 mV (5 mV typical)

Recommended load
4/8 Ω

Frequency Response
8 Hz – 56 kHz, +0/-3 dB; 20 Hz – 20 kHz, +0,-0.3 dB

Signal-to-Noise Ratio
>124 dB referenced to rated output (A-Weighted)

Speaker Outputs

Speaker Outputs
1 Pair per channel High-current, 32 A Detachable “Phoenix” style connectors

Power and Dimensions

Power Requirements
2 x 15 A @ 120 V; 2 x 8 A @ 230V AC 50-60 Hz

Power Consumption
<1/2 W @ Standby, 2 x 1440W Maximum

Dimensions
20.75″ x 19″ x 5RU(LxW in inches)

Weight
Up to 68kg